The YouTube video showing the process of making this pendant light out of resin is now UP! Check it out by following the link at the end of this post.
We wanted to try mimicking the organic look of a blown glass lamp shade and went with blues and purples. What colors should we try next?
It's been a minute since I did any work on the #sawtoothxl but I managed to take a little time out my day to get the doors primered yesterday. Used the #totalboat epoxy primer and reducer seemed to spray fairly nice.... not much of a painter 🤫
Jessica @thejessicamoss86 and I were trialing some thermochromic pigment paired with @totalboat resin. Definitely a cool effect, but the insulating factors of wood is hindering so we're looking for a work around. Basically you have to heat the entire obect to change color. There needs to be some sort of thermal break between the wood and the color changing pigment. If you were making a pen or a duck call.... 🤔
It's outdoor slab season again! Here's a nice ambrosia maple slab that will be an outdoor bar table. After cutting in a Kingwood bowtie to tighten up that crack, all the cracks and wormholes we're expxy filled. The slab was then sanded flat and two coats of @totalboat clear penetrating epoxy sealer we're applied. After a few days cure time it will get several coats of @epifanesyachtcoatings matte Marine varnish. Done right the first time! I was working a video on properly finishing wood for outdoor use, but apparently my phone doesn't think that's important and the video vanished.
Here's a little teaser of my latest video where I made a resin and wood bowl. You can see the whole video on my YouTube channel (link in bio 👉 @fixthisbuildthat). Lots of new challenges in this one. Are you trying anything new with your current or next project? #epoxy#bowl#fixthisbuildthat
Remember the walnut log with the big knot hole I cut up in my bandsaw tips vid a couple weeks ago? Well I found a use for it! I filled the knot with gold tinted epoxy to match the brass spacers and add a cool translucent glowing feature to the top of the desk lamp I'm making. Makes me feel like Goldmember from Austin Powers.... GOOOOOLLLLDDDDD! 😀🥇 🏆🏅🎖️ #gold#epoxy#fixthisbuildthat
Finally done! Painting the topside of your boat is not easy or fun! Took a lot more time and effort than I planned, but what a difference it made. 😍 Check out the link in my bio to see the job being done and the problems that arised. 😂
34 1,38524 December, 2018
This product uses the Instagram API but is not endorsed or certified by Instagram. All Instagram™ logos and trademarks displayed on this application are property of Instagram